I recently downloaded and installed Intel Active Monitor ( ver 1.2.1 ) .I am facing the following problem since installation:

1. Whenever I boot the system cold , I find the Monitor giving alert for one of the power zones crossing the threshold limits . One of the Voltmeters( not the CPU Core OR the CPU I/O ) indicate a voltage of 0.63 V as against the recommended(green) value of 11 - 13 volts.

2. However , on restarting , the sys behaves totally normal and there are no problems.

3. I want to know if anything appears seriously wrong with my sys and what action should be taken from my side in order to rectify .Or should i continue to restart , after every cold boot,to restore normalcy.

2. I have Intel® Desktop Board D850MV based system with following details:

Processor Intel® Pentium® 4 CPU 1700MHz
Bus speed 400 MHz
L1 cache Data Cache 8KB, Execution Trace Cache 12K Micro-ops
L2 cache Advanced Transfer Cache 256 KB
Form factor ZIF Socket
Stepping 10

Physical memory 128 MB RAM
Memory speed PC600
Memory type Other, RAMBUS
Form factor RIMM
BIOS date 03/28/2002
BIOS size 512 KB
BIOS version P10 (MV85010A.86A.0025.P10.0203282158)

Does anyone have any ideas that could help me?

STAYING ACTIVE RULE! Hi members, The main condition on the grounds of which we give hosting is Staying Active. Most of the users ask, what we mean by it ? The answer is a bit difficult. We usually check if a member is active on a WEEKLY basis. If we see tha ...more

I'm sure 95 % of you are running your system with one monitor. Primarily because that is the default for any computer. What if i told you that running your system with dual monitors or even triple monitors will increase your user performance extensively? Ways it helps: - can ...more

I have NEC multisync FP912SB monitor that exhibits strange behavior. I wanted to get feedback if it is worth repairing/fixing it.I already have a new monitor and I was planning on giving this old one to charity if it can be fixed easily. Thanks 1. Few minutes afte ...more