Visual Basic.NET Help Needed.

I have a project to submit this wednesday, and i have to make it a working program. Not a big one .. but just sumthing small that includes : Splitter, Progress Bar & Track Bar. I thought of making sumthing like the picture below, I would enter the text and hit the button .. the text would come in BOTH the labels. Then i move the track bar on the left to increase the font or/and the track bar on the right to change the color ( RBG only 3 colors ). The progress bar at the bottom will show the progress every time i move either of the track bars to a level. Click to view attachment Nothing fancy .. but just to see how it works, now i managed till changing color part, but i cant tend to program the "change font size" track bar and the progress bar .. Another idea to make it easier .. was to put just 1 label insted of 2 .. so that when i hit the button, the text comes in the label and then when i more either of the track bars (color or font size ) the change appears in the label itself. Regards Dhanesh.

Comment/Reply (w/o sign-up)

Okeyz , well i managed to do almost everything of it .. but m stuck on the progress bar ..

Situation : I have a "Track Bar" to select either of the three colors (Red, Blue, Green), i select the color and hit a "button" wherein the colored text in l1 goes to l2,

Code for the "button"
If tbar.Value = 1 Then
l2.Text = l.Text
l2.ForeColor = Color.Green
pb.Value = 30
ElseIf tbar.Value = 2 Then
l2.Text = l.Text
l2.ForeColor = Color.Red
pb.Value = 60
............
............ etc
ElseIf tbar.Value = 0 Then
pb.Value = 0
End If

pb = progress bar , tbar = trackbar

What i want is when i select the color on the track bar and hit the button, i need the progress bar to run to 100% in say 1 min, not that anything is actually happening, but i need the progress bar to reach 100% and back to 0 (blank) in a span of 1 min. Is this possible. In the above code, when i select the color and hit the button, the progress bar just comes to 20 or 60 or 100 etc and stops there, i want it to go back to 0.

As far as i can guess, u need to initialize it to 0 ? but how ? i tried defining "A" as integer in global and after:

ElseIf tbar.Value = 2 Then
l2.Text = l.Text
l2.ForeColor = Color.Red
pb.Value = 60
pb.val = 0
..............etc

This is stupid lol and dosent work , but i kinda have no idea how to set a time out or counter or initialize .. whatever we can call it ..

Regards
Dhanesh.

 

 

 

Comment/Reply (w/o sign-up)

Been awhile since I have had to do some programming homework but here is a shot. I didn’t have the original problem so I tried to interpret your question as closely as possible. You apparently figured out most of the problem but was left with questions on the progress bar and font size which my example addresses. Please forgive me for not correctly naming all the variables, I threw this together in 20 minutes or so.

The key to VB.NET is to realize that most of it is event driven, For example, when you click a button then a button.clicked event is fired. For the color part I added a button, progress bar, and slider in the designer. I set the slider to minimum of 1 and maximum of 3, representing red, blue, and green. Now to get the progress bar to go up and down I also added a timer and set the interval to 50 ms. When you click the button, a global variable is set with the color and the timer is started. Every 50ms the timer will fire. Another global variable is used to keep track of the progress bar progress.

The timer function is split into four parts. The top half handles the progress bar going up and the bottom half handles the progress bar going down. Within each half, one section handles the increment/deincrement and the other half handles the boundary condition.

Changin the font is simpler still. Make a function that will handle the slider change event and set the label value to the slider value. I have to admit that I had to look up the font declaration on Google though.

I hope this helps. If you still have time and need help, let me know. The project can be found at http://www.ycoderscookbook.com/Files/ColorFontEx.rar

Comment/Reply (w/o sign-up)

Wooho .. finally. Thankx tansqrx for the help. Just a few more questions about the code you wrote tho

If m not wrong, this is written in VB .NET 2005 ? I use 2003 .. I hope there will be no syntax change between the two. Because VB 6 to VB 2003 has syntax change.

Secondly, could you please explain what these lines do :
Option Strict On
Option Explicit On ---> what do these lines do ?

Private _bDirection As Boolean ----> isnt it supposed to be like Dim _bDirection As Boolean ? Y the Private ?

_bDirection
_iTimer
_Color ---> cant i just write direction, timer, color ? does the "_i" , "_b" or "_" mean anything important ?

Timer1_Tick ---> this is the timer control that i have to drag and drop in the form and then double click to code it .. right ?

lChangeText ----> this is the label name where the text will be changed ? like color and size ?

tbColor ---> this is the name for the color change track bar ?

I am a total starter at VB, and we have just been taught to make programs like "Add 2 numbers" , "Calculate the Profit based on values" etc .. basically the real beginners programs, so i have no idea about high level syntax.

Moving on to control working:

Font Change:
lChangeText.Font = New Font("Microsoft Sans Serif", TrackBar1.Value, FontStyle.Regular, GraphicsUnit.Point)
The above line will ONLY change the font size ? or will it change the font style ?

Progress bar:
The progress bar example that you provided is a little longer, takes almost 20sec to go up and 20 secs to go down .. how and where do i reduce this time taken. Also if the up time is 20 sec ... could the down time be 1 sec ? as in progress should go to 100% and then just vanish insted of goin down.

I am at office right now, and i cant think of anything more right now, your program was just too specific and to the point lol .. just like i wanted .. I will be leaving for college in 4 hrs and will go and try this there and will post up if i have more question. Hope i explained myself correctly, i am bad at explaining things .. if you have any questions .. i'll be willing to illustrate too. Thankx again.

Regards
Dhanesh.

Comment/Reply (w/o sign-up)

Nope - whatever syntax change was to happen has already happened between VB6 and VB.NET 2003. The whole coding paradigm was upgraded. Now you'll see only very minor changes - but no major leap.


With Option Explicit set to On, you'll to explicitly define every variable before you use them (similar to C++). VB6 allowed you to simply use any random variable at any point of the code - which could add to massive confusion later on. This way you have to clearly outline your variables before you start coding and also minimizes the chance of naming clashes and subsequent overwriting of the same variable within scope.

Option Strict disallows you to cast between data types without proper casting commands. For example, you in VB6 you could equate an Integer var to a Float or String or whatever. Not so with Option Strict on. You've to use some data casting command - like System.Convert, CInt, CDouble etc. to change your data to a suitable type before assinging to a variable.


Almost same - but using simply Dim makes your variable Public by default. You've to read a bit more on the access modifiers. With the advent of OOP, now there are several access modifiers like Public, Private, Protected, Friend etc - each of which have a definite effect on the scope of the variable.


The _i, _b is a clever trick that helps you avoid a lot of confusion later on. Normally you've no way of knowing WHAT DATA TYPE is a particular variable by looking at the code - unless you go back and refer to the variable declaration part. This task becomes very tiresome as your code increases. If you prefix your variables with a _i, _b, _f etc - you immediately know the type of your var,
i standing for Integer
b for Boolean
f for Float.. etc.. Just use your imagination.

Also certain words like Timer, Color etc - are either reserved keywords or name of some system constant. If you use variable names like these there might be clashes and problems... Thus it's an ideal coding practise to append a "_" (underscore) before the name of the variable. That also tells you that the name is question IS a variable defined by you.



Yep - right on. Also from the two drop-down boxes above the designer, you can PICK which event you want to code for and not just rely on the double-click to bring up the default event.

For the rest - over to tansgrx Me got to get busy with work again Good luck..

Comment/Reply (w/o sign-up)

Nice Explaination m^e .. thankx. But again like always i will annoy you with more questions , m leaving for office now, so will go to office and post from there.

In the mean time, i completed the program !! yeayeee ! ... lol .. check the link and teme how it is .. i'll make minor changes if any .. b4 i submit it today ... A big Thanks again to you guys for helping out ..

Regards
Dhanesh.

>> Download <<

Comment/Reply (w/o sign-up)

Finally its over .. thanks for all ur help guys .. this is the final Program m attaching, its small and really n00bish .. but its my start .. atleast having a place like astahost to clear doubts would make me a successful programmer one day .. thankx

Regards,
Dhanesh.

Click to view attachment

Comment/Reply (w/o sign-up)

I will try to answer all your questions. When you start out everything is a question and it is always good to find someone that will help you out.



There is no syntax change between 2003 and 2005, if there is it is an addition. VB.NET is an entirely new language from VB 6. One of the strongest similarities is the name. Outside of that, most everything has changed. The biggest difference in 2003 to 2005 is 2005 uses .NET Framework 2.0 opposed to .NET 1.1. .NET 2.0 adds new classes and methods to the framework. Any new changes can be seen in any of the .NET languages, even C#.



This is just plain good programming practice. VB has a nasty habit of automatically converting data types when needed. Say you wanted to print the integer 4. Option Strict will not allow the complier to assume that the integer should automatically be converted to a string. Instead you will have to retype it similar to cstr(integer). This might look like a hassle at first but as your project grows you will get bit by this little “bug.” More complex data types so not convert as expected and you will spend hours if not day trying to figure out the problem. Option Explicit makes sure you declare each variable with a Dim. Same as above, you do not have to declare what type a variable is. VB will assume a conversion for you, even if it is wrong. In short I have been programming long enough that putting both options to on is the first thing I do in a project.



_bDirection is a global variable. As such I do not want it to be public outside the current class. Using Dim has an implied public attribute.



Yes you can write anything you want. Where I work we follow a particular code standard. Its actually interesting because out standard goes against the Microsoft coding standard. The standard you see is commonly referred to Hungarian Notation. The first part of the variable represents what the variable is; i=integer, str=string, txt=textbox. The second part is the description with each word capitalized. From earlier you noticed the _ before the direction variable. This is another aspect of the coding standard. Global variable should have a _ before them. Practically this is used so you can have a property by the same name without the underscore. Also you will notice the b in front of Direction, which means it’s a Boolean variable.



Yes, just remember that double clicking only prompts for that control’s default action. In the case of a timer that is the tick event. In many cases there are many event you can capture from a control.



Yes



Yes



You can also change the style. You will have to make a variable out of the “Microsoft Sans Serif” field.



This is where your timer_tick event comes in. What happens is that every 50 ms the tick event fires and increments the counter by 1. You can change the timer.interval value to a smaller number or you could increment by a larger number i.e. iIndex+=2 to make it speed up. Changing to a different increment in either direction would change the up and down times. If you want the progress bar to clear after it gets to 100% then completely take the down part out and when iIndex gets to 100, stop the timer and set the progress bar value to 0.

Comment/Reply (w/o sign-up)

flash or powerpoint info for vb2005
Visual Basic.NET Help Needed.

I am using vb2005, no big deal however I would like to upload either a flash8 show of photographs or a powerpoint but can't work out how to do that any help would be great.

-question by Kathie

Comment/Reply (w/o sign-up)