Ola a Todos /biggrin.gif" style="vertical-align:middle" emoid=":D" border="0" alt="biggrin.gif" />
This tutorial will show you how to convert a photo in to a pencil sketch. Step 1 Open your photo
in Adobe Photoshop. Step 2 Right click on Background layer and choose "Duplicate layer" Step
3 Now, lets convert the new layer in to black and white. For this we'll use a shortcut
CTRL+Shift+U, or just go to image->adjustments->desaturate Step 4 Duplicate a copy of the new
Background layer, so that the new layer we will work on step 5 is above all others. St...

Intro: Ok let's get started. Open up a new 400x130 px document. Play around with any render you
feel like using. Resize it so that it's a good size for the signature. I will try to edit this
post with a image version of the sig later* 1.) Choose a radial gradient type from your gradients.
Pick black and another color. 2.) Click around the middle of the sig and hold it to around half-way
to the end. Re-try until the middle of your sig has a gradient in it. 3.) Move your render into the
sig and duplicate it 5 times (control+j) . 4.) Smudge the first one you co...

Side Notes: I hope you enjoy it. I made this awhile ago, but didn't posted it before. I
though it was time to be shared, so here it is. ...

Key terms and concepts Adobe – software company established in 1982. Invented PostScript and
later, the Portable document Format (PDF). They are responsible for the popular applications
Photoshop, Illustrator and InDesign. Many beginners erroneously call Illustrator or Photoshop
"Adobe" (as in "when I open up Adobe...") Don't make this mistake. Adobe is the company - use
the name of the software you are working with. Photoshop – raster image manipulation application
created in 1986 by Thomas Knoll and purchased by Adobe in 1988 to be released in 1990. Version...

Sorry I don't have any images for this tutorial, but it's so easy you won't need them!
Okay, here we go... 1. Start off with a square image, white background. I think 400x400 works best.
2. Go to Filter>Render>Clouds 3. Go to Filter>Pixelate>Mezzotint: Short Lines 4. Go to
Filter>Blur>Radial Blur: 100%, Zoom, and Best. 5. Hit Ctrl+F to duplicate the filter 6. Duplicate
the layer 7. Go to Filter>Distort>Twirl: 75 or -75 (top layer only) 8. Set the top layer's
blending mode to "Lighten" 9. Now merge the layers and press Ctrl+U to colorize! Or... 1...

Bloody Text 1-Create a new white back ground color document ( my document size is 500*150) 2- type
your text ( Font: Arial Black, Size: 50px, Color: black) 3-click Filter > Blur > Gaussian Blur,
Radius: 5.0 pixels. 4- Click Filter > Stylize > Find Edges, and again (Ctrl+f) 5-Click Image >
Adjustments > Hue/Saturation, mark Colorize, Hue: 360, Saturation:100 and Lightness:0. 6- Click
Image > Rotate Canvas > 90 CW 7- Click Filter > Stylize > Wind , Method: Wind , Direction :From the
right. and again (Ctrl+f). 8- Click Image > Rotate Canvas > 90 CCW. ...

Hello , Using the Text follow Path Method I'll show you the way to control a text area very
simple . You may find this useful when design a web page template Lets start . In most cases when
you design a web page template you will need to change font family or size of the text So the whole
template will change its layout .. To control this in a friendly way use text follow path method .
How ?! Let me explain to you The most important is that when ever you
need to change the text , font , style or size of the text inside this text ar...

A PSD is an image, generally of a person (but not always) that has a transparent background around
the main object. The name comes from that originally these were always saved with a .psd extension.
I'm going to start with this image: To follow the tutorial, I suggest you copy this image.
It is an easy image for beginner's because the background is very plain. Start off by selecting
the polygonal lasso. You may have to click and hold down on the lasso tool so you can select the
polygonal one. The image that you should select is shown below. After you h...

Hi guys, This is the first time I am writing a tutorial so please be patient where ever I go wrong.
I saw an image at deviantart.com which i liked very much, however I have lost that now, but still
have that in mind. In this tutorial i have tried to get that similar effect on any photograph.
Here is the picture i started off with (better if there is no sun): The first step is to
desaturate it: (ctrl+shift+u) Now we need to have a moon: Use eclipse tool to draw a circle
(feather=10px) and fill it with white color. Lower down the opacity of it. Thus we have got...

Hi al here's the Tutorial: 1. start a new file. Instead of RGB choose CMYK 2.
create layer and do render clouds 3. press cntrl + B to do the colour balance and make Red +
73 4. Filter->distort->twirl 828 degrees 5. make a new layer beneath the twirled layer
and also set the colour balance to red +73 7. make sure that that layer is below the already
twirled layer 8. take the layer at the bottom and do filter->distort->twirl -828 degrees
9. set the mode of the upper layer (first layer) to screen 10: ...

Well I made this a little bit ago for a site called Gamexe.net, note i put .com on accident but
other than that it should work just fine. Please do not put this on any other website without my
permission. If you want to know what brushes I used just ask, I don't feel like figuring out
right now =P ...

Hello , This is a good tutorial about a famous glamour effect used by photoshop editors all over
the world .. Have you noticed these images for models in black and white with part or more in these
images in colors ?! There are many ways to cet this type of effect applyed to your images .... You
can select the parts you want and create a copy from your selection then apply the desaturation to
the origional , Or you can create a copy layer from the origional and use erase tool to erase the
parts you want and then apply the desaturation to the origional .. ,,, As you ca...

I took it upon myself to make visual instructions, its alot easier to understand. ok start out
with a clean WHITE background you foreground color should be black. and background color should be a
dark green (I use #14B908, but u can use any NEON GREEN looking color, you want something bright)
go to FILTER>Texture>GRAIN make sure grain type is VERTICAL intensity=100 contrast=48 next step
we go to FILTER>artistic>NEON GLOW the GLOW COLOR should be something darker (I use #185403) glow
size= -11 glow brightness=34 hit OK and SUPRISE...the matrix reveals its secret...

Note: Here (click) is the render i'm using for this sig. Ok so open up PhotoShop and
let's begin: 1.) Open up your render and a sig document (new doc any size I use 400x100 for
smudge) 2.) Bring render over to signature doc and smudge with these settings for the brush:
This is what I have so far: 3.) Bring your render over again and resize so it fits. Here's
what I have: 4.) Ok not duplicate it 3 times (control+j) and hide the bottom render layer. 5.)
Smudge your render and set the layer above it to color dodge and the layer above that to ...

Ok so open up a new doc I use 400x130 px. 1.) Change colors to black and white. 2.) Go to
Filter>Render>Clouds. 3.) Add some sparkle/nightsky brushes. 4.) Do a new layer and add your render
and some grunge brushes in this order: White.new layer, black, new layer, white. 5.) Now it's
time for the tech brushes! Add some tech brushes all around and make sure you right click the layers
with the tech brushing and set drop shadow. 6.) Now press Cntrl+B for a color balance. Change it
around until you get a good effect. 7.) You can now choose some of these effects: add a c4...

First open a new document Fill the layer with a color, start with black Use Filter>Render>Lens
Flare and choose 50-300mm zoom Apply five lens flare, 1 in the center and 4 in each corner Then
apply Filter>Sketch>Chrome with detail of 4 and smoothness of 8 Copy the layer and apply
Filter>Distort>Twirl of 200 Copy that copied layer and apply Filter>Distort>Twirl with -400 Set
both copied layers blending mode to Lighten and merge all layers Now go to Image>Adjustments>Color
Balance and choose whatever color, I did red. You can mess around with some of those paramete...

Info: Did you ever wonder, while working in Photoshop: what does this tool do? Then this brief
tutorial is for you. You will learn what are the most used tools in Photoshop, their names, what to
do with chosen tool, and for what purpose. Let's start with the tutorial. NOTE: to
access tools that are in same icon group as Main tool selected just click and hold to reveal menu
with other tools inside. Marquee tool It's commonly used for selecting some part of
opened image, that you want to cut-out, move resize or apply some filter on it. There are ...

QUOTE Dashed Border Click the images to enlarge them Do this first!!! 1) Open a new
image that is 8x8 pixels 2) Use the pencil tool (Right Click on the brush tool and selet Pencil". 3)
Now, draw a patern like this: 4) Go to Edit -> Define Patern, and just click OK Now do this 1)
Create a new image, or open an existing image you wish to put the border on. 2) Hit "Ctrl+Shift+N"
to create a new layer or Layer -> New -> Layer.... 3) With the new layer selected hit "Ctrl+A" or
go to Select -> All. 4) Now, go to Edit -> Stroke, and apply the following sett...

simple as they come, its my first, hope you like it /unsure.gif" style="vertical-align:middle"
emoid=":unsure:" border="0" alt="unsure.gif" /> Tutby: joão mustra ...

For those of you who don't already know, Photoshop has these nifty little features called
Actions. Now, these actions can be used for many things, including the creation of beautiful and eye
catching effects, maximizing your productivity, or simply to carry out the tedious and mundane tasks
that your lazy ass just doesn't feel like doing. I recently had the pleasure of turning
.diplomat.'s beautiful " Daze " theme for SMF into something of my own, and being the genius
that I am, I used these wonderful actions and a little thing called Batch Processing. I'...

I am going to show you how to create this neat little shape trick i used in my sig my sig isnt
the best, but i like the little trick i did with the shape...a lot of people have been asking me
about it so i decided to write a tut on it. anyways. you want to start out with a blank page, so
goto File->New (for all the n00bs) and you want your image to be 425 x 125 pixels (doesnt have to be
but that is the sig size). now you want to use your fill tool, which is on the toolbar (which is on
the left of your screen) it is a rectangle with a gradient pattern filled in it. ...

First of all start with a new document about 150w x 50h, » select a color and then using the
rounded rectangle function create a rectangular box leaving about 5 pixels per side, » Add text
then ratersize the text layer and the rectangle layer , » merge the two layers together(Ctrl + E),
» duplicate the merged layer, » On the duplicated layer click image > adjustments > hue and
saturation then tick colorise, » Move the hue and saturation bars until satisfied with color , »
Delete all other layers such as background leaving just the rectangle and the duplicated la...

Firstly, there are varying tutorials like this but this is one way in which you can achieve the
simple effect. Program: Photoshop Elements or Higher Note: Reset your template colours to B/W
(press D). Also, instead of screening blend, try Overlay. 1) Create a 500 X 500 pixel picture with
Transparency 2) Go to Filters -> Render -> Cloud. (Repeat until a desirable cloud is shown) 3) Go to
Filters -> Render -> Difference Cloud. 4) Invert the picture (Ctrl + I) 5) Make the levels equal.
(Shift+Ctrl+L) Now comes the fun parts /laugh.gif' border='0' style='vertical-alig...

Okay, are you ready to make a cool sig? Well I'm here to teach you how to make a sig like this
Well for starters, we want to make the background. toolbar 1)First create a new file
with the demensions of 400 width and 150 height pic 2)Next, you want to make the
background background, you can acomplish this by using the paint bucket tool and clicking on the
picture. 3)Now we want some good brushes. I used the WW 11 brush which is not availible
online anymore(If anyone has a place I can store the file, tell me so I can put the downl...

Alright, heres what you gotta do. 1. you need a camera that has a burst mode, and depending on your
sequence you'll want at LEAST a 2fps drive mode. 2. set up your shot and shoot the subject,
besure to get entry shots and run off shots to fill up your picture space. 3. open all of the
pictures into photoshop and chose the first picture as the "background". have your layer pallet
open. drag the "background" layer onto the "new layer" button to make a copy of the background.
delete the original. 4. now, one by one, you'll need to copy each picture one by one a...

Since this is the Photoshop board let's populate it with a post on the namesake of Photoshop:
how to do basic editing of photos. Note: This is for both digital photos and film photos that have
been scanned and turned into digital format. The key here is streamlining workflow. So usually,
even before you think of opening up the photos in Photoshop. make sure you have deleted the ones
that are too blur or are not satisfactory. If there is one thing Photoshop can't fix, that's
overly blur pictures. So you can either open the photos up in ACDSee and see each ph...