Linksys Wmp54gs And Linux - Fedora Core 3

I am new to linux and just installed Kubuntu. I have windows XP on my master primary hard drive and
Kubuntu is installed on my slave drive. Everything seems to work great except that I cannot connect
to the internet when I boot into Kubuntu (I also tried Ubuntu). I am thinking maybe it has something
to do with ethernet adapter driver. I can connect just fine in windows, so I know that the actual
hardware isn't messed up. Windows uses the driver for Realtek RTL8139/810x Family Ethernet NIC.
I looked through google and help forum threads and it seems others have h...

QUOTE Specs: Compaq Presario C304 Laptop with Broadcom 802.11g Wireless Network Adapter PCI
Factory installed that works well running Windows XP Home, but I installed a copy of Ubuntu using
Wubi and Linux does not connect via the wireless smile.gif I am new to Linux and need some
assistance diagnosing the problem. I have read up a little on the Wubi/Ubuntu/Networking and
Wireless Forum and am totally confused about some of the issues which may be causing the problem.
Where do I start? I have a copy of Everest on the Windows Boot side, so if you require any informati...

Well, I have had a linksys wireless b router for some time now, but had been having issues with not
getting a strong enough signal throughout my house. Yet what seemed odd, is that I could get
stronger signal from all of my neighbors, even those who were down the street several houses from
me. And so I decided that it was time to purchase a new wireless router. Even though, the newest
computer I have is wireless g, I went for the wireless n because of the increased range, and the
thought that it will probably be a better investment for the future. I am impressed, immed...

Today I was out looking for the WRT54GL, the router with the Linux based firmware. I can't seem
to find it in stores ANYWHERE! It's like Linksys is anti-GPL so they created this router just to
get people to shut up about how they changed the WRT54G when someone noticed it was Linux based and
they should have provided the source code. I'd like to get a WRT54GL so I can load DD-WRT on it
as DD-WRT looks like excellent firmware. My router, WRT54G v5 can only support the mini-DD-WRT
because Linksys decided to go evil with this version and made the firmware non-L...

I have a Linux box with three ethernet ports (NIC cards). I could easily give it more. I have one
ethernet connection to the outside world at college. College's ethernet policy is amazing, as
they give us IP addresses that in theory are fully routable from the outside world (haven't had
a chance to try it out). Unfortunately, I have another computer, my primary laptop, that is
connected to the internet, and no switch or router. I was wondering how to use my Linux box as
either a switch or router. What I want to do is the following: 1) Connect the Linux box ...

When I am on a Unix system or on a Linux system, I use a configuration file named ".netrc", which
stores my most used ftp settings. Is there an equivalent for ftp under Windows XP ? I tried
testing/guessing, I failed, it's not net.rc nor .netrc. It's not horribly necessary, but I
would like to know what replaces .netrc on a Windows machine....

I am standing on my PC, I so "ftp myserver", and I am ejected with the following message : 530 Must
perform authentication before identifying USER. Same problem with Filezilla. How can the user
perform authentification ? The only way I know is "User" myname. If it refuses the "user" syntax,
how can I perform the authentification ? My distro is a Redhat, Linux myserver 2.6.9-22.EL ...

I won't exactly call it a problem because it isn't now but used to be. OK so i bought my
Linksys PCI adapter in Singapore so my sis could use the internet at the same time as i am. But it
couldn't detect the (I'm guessing" weak signal emitted from my cheap router. My computer
(Which isn't using the linksys adapter) uses a cheap external wireless adapter the same brand as
the router and it connects perfectly. When i called linksys to ask why it didn't work, they told
me its because the signal is very weak and when i tried like nudge it a little it ...

Im trying to get my Belkin F5D7050 wireless USB dongle to work, but linux doesnt seem to see it Ive
installed the drivers using ndiswrapper, but it just says hardware not found. Any help would be
great. ...

How can I have my Linksys open more than one port 80? I have one Apache server running on a computer
with two NIC cards. I also have a ColdFusion development server running on port 8500 and uses a
different internal IP. Whenever I try to open port 80 for another IP, I get a "Port overlap"
message. Is there a way to wildcard requests for all IPs? Thanks! F...

I have a WAP54G Linksys Wireless Access Point running in G mode with the Latest firmware, with my
only Laptop also using Intel ® Pro/Wireless 2100 LAN miniPCI Adapter G Mode Card built-in. I also
have a PCMCIA WPC54G Linksys Card G Mode capable. It is running at 2.4 Ghz Frequency. I had a Dell
Wireless 1350(b/g)WLAN miniPCI Card (Built-in) but recently had an Intel ® Pro/Wireless 2100 LAN
miniPCI Adapter installed. The issue is: My wireless connection drops at odd times of the day and
does not locate the Access Point for about 5 minutes, I contact Dell my OEM and swap...

I got a new LinkSys router to replace my D-Link router which flipped out after a firmware upgrade.
I'm only having a few problems: 1) My Netgear switch won't connect (I can't get into the
configuration screens to re-configure it) but I'm going to get a for sure working LinkSys
Wireless bridge 2) A weird problem in which I'll describe below: I can only access the Internet
wirelessly on my laptop. If I plug in an ethernet cable, NO INTERNET... Wireless where I am in my
house is terrible.. Right now, signal status is "Low" but if I sit on the floor by m...

((First post. ^^;;;)) /happy.gif" style="vertical-align:middle" emoid="^_^" border="0"
alt="happy.gif" /> Right, so I have two computers and they're linked with a Linksys Networking
..err.. thing. It worked fine for nearly a year, and then suddenly stopped. I know it's hooked
up correctly because nobody touched the wires in between the time when it was working and when it
wasn't. /blink.gif" style="vertical-align:middle" emoid=":blink:" border="0" alt="blink.gif"
/> I've heard that that particular networking thing isn't the most reliable device a...

Ok First off I have a Linksys Wireless-B Broadband router. The problem is when I enter all my stuff
for portforwarding and click enable then click save changes it does not save. I contatced the people
at Lynksys and their insturctions could not help me. Anyone have a clue on how to fix this. I also
have updated my frimware and hardrested...

Could i run Linux operating system on my server and have my other 2 computers running on windows xp
professional, as i have heard that it can be a right pain in the groin /laugh.gif"
style="vertical-align:middle" emoid=":lol:" border="0" alt="laugh.gif" /> to network together. So
would it be alright to do this or will it stop my internet....

Hi, I am trying to install a Linux Distro and convert to it from Windows. I was just wondering if
anyone knows of a site that rates the different versions of Linux according to :: 1) Ease of Use 2)
Ease of installing 3) Speed ( on slower PCs) 4) Support 5) Similarity to Windows GUI I wanna konw
cos my friends and I are planning to setup a new company on budget, and with Windows, it is
virtually impossible to do anything cheaply. Thanks Edmund...

Hi all, BIND is already installed on my server (am using Fedora Core 2) - can anyone help me
in setting up the DNS Zones and configuring the named.conf - preferrbaly the NON-GUI way ?? I'm
more comfortable with the console and vi way. I've tried in uncountable ways and all it has
given me are uncountable bad hair days... /sad.gif" style="vertical-align:middle" emoid=":("
border="0" alt="sad.gif" /> Thanks...

Ok, I Have 3 computer In My House. I Had Them All Setup and Working Fine... But Now I Want to switch
one of them to linux, but still share a connection. Ok This Is How My Network Works.... 1st
Computer: Connection Computer: 2nd Computer: XP Box: 3rd Computer: Linux: I Have The Network Up and
running Fine, But I Have Tried To Put Linux On My Network Before.. And it couldn't connect to
the net, share files, or anything.. Is There Something That i Have TO Config? Or What? If you
Know How TO Help Me... Please Do!...