FirefoxRocks
Jun 15 2008, 11:06 PM
On my new computer, I decided to install Linux as I need it for development purposes. Wanting to take a shortcut, I tried using Wubi, the Windows-based Ubuntu Installer. Everything went fine as it installed. I restarted the system to find revalidation errors when booting. It kept on repeating the same thing over and over so I thought that the Wubi installation was corrupted or otherwise damaged. I downloaded Ubuntu 8.04 and burnt it onto a CD-R and tried that instead. I couldn't even boot into the Live CD session because the same error came up. It looked like this: QUOTE ATA1.00: revalidation failed (errno=-5) I went into the system CMOS and changed something from IDE to RAID (I think it was hard drive controller or something). Linux boot into the Live CD session successfully after that, and also installed properly. After that, I noticed that I couldn't boot into Windows Vista anymore. It would come up as © Microsoft Corporation and reboot itself. I switched it back to IDE and Vista booted fine. 1 problem though, Linux can't boot. The same error occurs when booting and it leaves me in a command prompt thing called BusyBox. I have looked at this page: http://ubuntuforums.org/showthread.php?t=773225 and tried the 2 options suggested on page http://ubuntuforums.org/showthread.php?t=767668 but they don't work. I do not want to have to switch settings in the CMOS everytime I switch operating systems. What should I do?
Comment/Reply (w/o sign-up)
Jeigh
Jun 15 2008, 11:35 PM
I don't personally know the way to fix this, however, I would recommend the forums at www.ubuntuforums.org (I think that is the address, it's the official ubuntu forums wherever they are) and search or post there. The users on the forum are very helpful when having problems with Ubuntu and more often then not someone else has already encountered the problem you are facing so you might be able to find usable results after a simple search. Good luck!
Comment/Reply (w/o sign-up)
FirefoxRocks
Jun 16 2008, 12:14 AM
If you reread my post, you'll already notice that I checked Ubuntu Forums.
Comment/Reply (w/o sign-up)
yordan
Jun 16 2008, 08:48 AM
Maybe you should give us some more infos about your hardware. And about your vista's system history. Did you buy a ready-to-use package with your system and Windows ? Who performed the installation ? Who configured the disks ? Clearly there is a discrepancy between the Windows and the Linux needs. It seems that your disk controller has several options, and it seems that - Windows has been installed with the IDE option, and boots from an IDE disk. - The Ubuntu boot disk does not recognize your IDE disk controller, so it cannot boot. It recognizes the RAID mode, but in this mode you have not Windows boot sector on your disk. I would say that, rougly, there are two ways fixing that : 1) finding the Ubuntu driver for your IDE settings, and find how to give this info to the Ubuntu install program. 2) find another Linux distro, Proably Redhat 5 will know your disks. By the way, I heard that the dual boot with Linux and Vista is not always managed correctly, be sure to use a very recent Linux distro (a release dated from far after Vista arriving). Hope this helped Yordan
Comment/Reply (w/o sign-up)
FirefoxRocks
Jun 16 2008, 01:11 PM
My hardware information: Dell Inspiron 530 system, Intel Core 2 Duo Processor 2.66 GHz, 500 GB hard drive, 4 GB memory. Vista is Dell-installed OEM version, service pack 1 was installed separately. The OS and disks were configured by the manufacturer. As mentioned in previous post, I am trying to use Ubuntu 8.04, the most recent version of Ubuntu. How do I configure the IDE driver for it to work? If I were to try another Linux distribution, would Kubuntu or Mandriva help?
Comment/Reply (w/o sign-up)
toby
Jun 16 2008, 05:40 PM
Kubuntu shouldn't be different enough. I would suggest Colinux or Gentoo, but Mandriva is good as far as I know.
Comment/Reply (w/o sign-up)
xboxrulz
Jun 16 2008, 06:07 PM
You need a clean installation of Windows Vista since it never installed the AHCI driver. It is better to keep your system in AHCI than IDE because it enables all the SATA functionality. IDE is just for backward-compatibility sake with the other hard drives but if all your internal hard drives are connected through SATA and not ATA then you will be fine by using AHCI. However, Windows Vista needs to be reinstalled in order to do so. That's what I did when I found out that my BIOS defaulted to IDE and not AHCI. (I reinstalled it after my system had system issues.) xboxrulz
Comment/Reply (w/o sign-up)
FirefoxRocks
Jun 16 2008, 10:01 PM
That presents another issue: I cannot reinstall Vista. I can only revert it to factory-default settings using Dell Restore (or something like that). Also just to confirm, the only 2 options for the drive is IDE and RAID, not AHCI. Is it also possible to find the IDE driver for Linux instead of using the other driver for Windows? Because Linux I can reinstall, but Windows I can't.
Comment/Reply (w/o sign-up)
xboxrulz
Jun 17 2008, 03:44 AM
Technically you can, although this is technically not illegal, download a torrent of the install disc, reinstall Windows Vista with the serial number provided at the bottom of the laptop and activate the serial number by phone (serial number cannot be validated via Internet since it's OEM). RAID includes AHCI. As for the IDE, I have no clue, the IDE driver should be included. However, I don't use Ubuntu Linux so no comment on that part. I usually use OpenSUSE or Fedora Core. xboxrulz
Comment/Reply (w/o sign-up)
FirefoxRocks
Jun 17 2008, 04:27 AM
QUOTE(xboxrulz @ Jun 16 2008, 10:44 PM)  Technically you can, although this is technically not illegal, download a torrent of the install disc, reinstall Windows Vista with the serial number provided at the bottom of the laptop and activate the serial number by phone (serial number cannot be validated via Internet since it's OEM).
RAID includes AHCI. As for the IDE, I have no clue, the IDE driver should be included. However, I don't use Ubuntu Linux so no comment on that part. I usually use OpenSUSE or Fedora Core.
xboxrulz I have a CD that is labelled Windows Vista Home Premium 32BIT, but that restores an OEM version of Windows. The serial number is located on a sticker on the side of the computer, but I don't think I will try the torrent thing. I guess I'll keep searching for the IDE driver, or if someone could tell me how to download/activate it, that would be great. (BTW, my computer is a desktop!! I think that my laptop purchase will occur in approximately 2-3 years.)
Comment/Reply (w/o sign-up)
docduke
Jun 26 2008, 03:24 AM
Thanks for the tip, that's exactly where I'm headed! The last computer I got was about 6 months ahead of the hardware-virtualization instructions. I now have an RFQ out for a virtualization platform. Since you have already been there, I would welcome any suggestions you might have. The options I am considering include: I have not looked at Dual Xeon or Dual Opteron systems before. That was recommended by one of the guys at the systems integrator. I really don't understand why the memory in their specs is so much slower than the others. My primary interest is in Linux hosting of the virtual systems, so I was inclined to go with a straight Intel CPU and chipset, to get the best availability of drivers. I just took a look at the ASUS website, and I find it very frustrating. Here are 3 products: I went after the third one to point out to you, and got Sorry! We are undergoing website maintenance ... Anyway, I find the ASUS description has lots of pretty promotional text and graphics but it omits the stuff I want to know. For example, it tells me its memory speed, but not how much memory it can support! I also want a system that can host a minimum of 6 sATA and 2 IDE hard drives. Again, I am unable to find the information. It is not clear that the promotional material even applies to the motherboard to which it is attached. For example, the F5E is a pure Intel system, yet it is claimed to have AMD CrossFire graphics.
Comment/Reply (w/o sign-up)
xboxrulz
Jun 20 2008, 06:26 AM
Ya, usually I never go with OEMs because they have funny hardware that gets to become an issue when you're not running Windows. This is the reason why I build all my systems with ASUS motherboards and compatible parts. Never had a broken ASUS build nor do I hope I will ever have a broken ASUS part. As for having multiple operating systems, I just virtualize them all. Just get a good dual core or quad core, and you'll be fine to virtualize the extra operating systems if you don't need 3D support. xboxrulz
Comment/Reply (w/o sign-up)
docduke
Jun 20 2008, 05:59 AM
For the lurkers out there, this is a textbook example of why I no longer buy Dell, E-Machines, HP, etc. I go to a system integrator and spec the motherboard and CPU, then cannibalize the generic parts from another computer. Usually, but not always, costs less, since monitor, power supply, etc. get reused. I used to get Gigabyte motherboards, but I've had one die, and another one is dying now, both with pregnant capacitors. More recently, I've been using MSI motherboards. They keep older ones available for both lower price and compatibility, and they also carry cutting edge boards. They support both Intel and AMD. Anyway, all my computers are multi-boot. That used to be easy with Power Quest's Boot Magic, but those guys got greedy and drove away their customers. With XP and Vista it gets harder, because of the security features built in. Late-model MSI motherboards have a "Live Update 2 " BIOS that is very customizable. It has a "fast boot" option that makes it almost impossible to interrupt. I disable that first  With a more normal boot, hitting F11 gives you a list of the installed drives (I have 5, including 3 in swappable bays, plus a DVD drive), and you can choose at that time to boot from any of them. If you want to easily multiboot from a single drive, consider Terabyte BING (Boot-It Next Generation). The folks there have a really elegant solution to multiboot, which does much more than anything else I have seen (but it isn't free).  I use it in conjunction with an MSI motherboard, and currently have it booting 8 different OSs in this machine.
Comment/Reply (w/o sign-up)
Similar Topics
Keywords : errors, installing, booting, live, cd, actual, installation
- Linux Software Installation Help
it tells how to install software in tar.bz2 or .bin extension (2)
With Wubi The Hard Drive Does Not Have To Be Repartitioned Before The Ubuntu Installation
(2) Wubi is an Ubuntu installer for Windows that lets you install and uninstall Ubuntu from a Windows
desktop. Wubi adds an entry to the Windows boot menu which allows you to run Linux. Ubuntu is
installed within a file in the Windows file system (a loopmounted partition), this file is seen by
Ubuntu as a real hard disk. That way the hard drive does not have to be repartitioned before the
Ubuntu installation. The resulting Ubuntu installation is a "real" Linux system, not just a virtual
machine. Wubi makes it easy for Linux newbies to play around with Ubuntu. http://wubi-i....
Ubuntu Installation Help !
(11) I am pretty well satisfied with SuSE linux, but wanted to give ubuntu a try. While installation i
came accross the partition selector. While in SuSE it is easy to understand, here in ubuntu its
kinda hard. The first screen of partition is shown below .. But To start off, see my HDD
partition status. Its a 100GB HDD with the partitions as follows: If i select the 3rd option
of doing it manually, it shows me all these detected: What do i have to do if i want to
install ubuntu on my 4th partition (F:), thats the 15GB one. And how does it automaticall....
True Type Fonts In Linux
Installation/configuration required? (4) As I mentioned in the other thread , I installed Ubuntu last night, and I am quite happy with the
result. And again, as I said there, the font rendering is something that give room for wanting
something better. The question is, can we use TrueType fonts with Linux, and specifically Ubuntu?
Is it as simple as copying the font files (.ttf) into a particular directory? Or do we need to
install or configure something? If it is simple as copying the required fonts to a particular
folder/directory, which directory should they be copied to? Edit: The fonts in Linux se....
Using Ndiswrapper In Fedora Core 6
Installation Error (4) Hi, I have been trying to install my wireless pcmcia card onto fedora core 6. to do this i have been
trying to use ndiswrapper http://ndiswrapper.sourceforge.net but with no luck. i am using
ndiswrapper-1.34 and i keep running into some problems. I can successfully complete the make
distclean, make and make install (root) commands and they work without a problem. It is only when i
try to enter the command ndiswrapper -i filename.inf (replacing filename.inf with the .inf file of
my pc card) i get the following error QUOTE # ndiswrapper -i WG511v2.INF bash: nd....
Problem With Fedora Core 5 Installation
In fact after installation..... (14) I was trying to load Fedora into my Machine. After 30 minutes of smooth run, I succeeded in
installing it. All along my mouse was working just fine. After the installation was complete, when I
rebooted the machine still mouse was fine. Now finally after I give the user ID and password fpr
login, the mouse pointer just disappeared!!! Well, the mouse still works. When I move the mouse the
items get highlighted. When I double click the highlighted item, it opens the application. The
scroll button is working fine. but.... The mouse pointer is not being displayed!!! I trie....
Suse Installation Question
(18) I am about to install SuSe as of now, and it is currently installing it. But i am not so shure /
happy with what i did. My question is in regard to the installation process and setting up the
partition. I have 4 partitions on my 100GB HDD. 40 / 20 / 20 / 20. C: 40 - Windows , D: 20 - BLANK
, E: 20 - BLANK , F: 20 - BLANK. While i got into the installation, SuSe prompted me with a
proposal and i quiet didnt understand most of what was written. I went to the Documents section on
SuSe but they dont have much on partitions. I went into the advanced options and saw all my p....
CentOS: Test Server Reporting Errors!
(5) Hello! I've got a test server launched using CentOS 4.3 Final and installed phpSysInfo on it to
monitor it. Well, when I ran it as Debian, I never got the following errors on the output: QUOTE
common_functions.php 294 file_exists(/proc/scsi/scsi) the file does not exist on your machine
common_functions.php 294 file_exists(/proc/bus/usb/devices) the file does not exist on your
machine common_functions.php 158 /bin/df /bin/df: `/proc': Permission denied /bin/df:
`/sys': Permission denied /bin/df: `/dev/pts': Permission denied /bin/df: `/pr....
( Auto ) Playing Cds On Old Debian Installation ?
(7) I got an old laptop and there's an old debian is installed. There's tuxbox etc. Firts off I
wanted to play an audio CD, but there was no aquto play, though. Then I asked my friend how to make
it and he said "mount cdrom" then it said only root can do that, I asked my frind and he said you
must change to root. It's kinda weird stuff going on here! Can any one help me?....
Looking for errors, installing, booting, live, cd, actual, installation
|
See Also,
*SIMILAR VIDEOS*
Searching Video's for errors, installing, booting, live, cd, actual, installation
|
advertisement
|
|