dhanesh
Jun 15 2006, 06:40 PM
My second tutorial after the S60 Font Change. A 4.7GB DVD is capable of holding upto 6 movie files (700MB DVDRips), people with DIVX players dont have any problems playing such content but for some who have only DVD/VCD/MP3 etc players with no chance of playing DIVX content would find this tutorial helpful. Well, hopefully this should work for all. Scene : You have 700MB DVDRips (.avi) of your favourite movies (Backed up from a DVD ofcourse lol) and you want to put them on a DVD making them a 3 in 1 DVD. Thats 700MB x 3 in ONE DVD. Tools Required :- Ulead DVD MovieFactory 5 (NOT FREE [b]$39.99[/b]) >> LINK <<
- DVDShrink (FREE) >> LINK <<
- Atleast/Minimum 12 - 13 GB of free space in your hard-disk.
- Lots of time !! lol
Procedure : Aight so lets get started ...
STEP 1 :
- Open up Ulead DVD MovieFactory 5 Launcher from your desktop and select under Video Disk > New Project.
- Under Create a Video Disk select DVD and hit OK.
- When the Software Opens up, select Start Project > New Project > DVD and click NEXT.
- In the next section do the following :
- Add Video Files
- UNTICK Create Menu.
- SELECT the clip and CLICK Project Settings.
- Under Project Settings TICK - Do Not Convert MPEG complaint Files , TICK - Two-Pass Conversion , then CLICK Change MPEG Settings... > Customize ...
- Frame Size : Standard (720 x 480)
- Display Aspect Ration 4:3
- Under Compression Tab ... Quality : 100%
- TICK : Two-Pass Encode.
- Video Data Rate : Variable - 5500 kbps
- Audio Format : Dolby Digital Audio
- Bit Rate : 192 kbps
- Then hit NEXT .. then again NEXT till you come to the BURN screen.
- UNTICK : Create to Disk
- TICK : Create DVD Folders.
- Select a BLANK folder you want your files to be saved in (12 - 13GB Min Free)
- HIT BURN ! (Bottom Right)
STEP 1 COMPLETE !
You will have to wait for like 7 - 8 Hrs depending on your PC Speed. But its worth. Please do take notice that during this time you PC will run slow ... HELL slow lol ... So its time for a nice nap ! 
STEP 2 :
- After the Conversion is complete, CLOSE Ulead Movie Factory.
- OPEN DVD Shrink 3.2.
- CLICK Open Files , and select the MAIN folder that has the 2 folders (Audio and Video).
- The software will analyse the frames etc and finally show you the main software screen.
- Open up the Main Movie tree and select Title 1.
- On the right side under Compression Settings > Select Custom Ratio.
- Slide the bar left-wise to the LOWEST % it can go.
- Hit Backup on the ToolBar.
- Select Backup Target as Hard Disk Folder
- Select a NEW Target folder.
- Under Quality Settings TICK Compress video with high quality error ...blah blah (Default)
- Hit OK..
STEP 2 COMPLETE !!
Your backup will now start and this time you can use your PC a little. DVD Shrink does not hang up ur system so much. This process takes say an Hr and a half to the MAX. STEP 3 :- Now AGAIN Open up Ulead DVD MovieFactory 5 Launcher from your desktop and select under Video Disk > New Project.
- Under Create a Video Disk select DVD and hit OK.
- When the Software Opens up, select Start Project > New Project > DVD and click NEXT.
- In the next screen do the Following :
- Click
 to Import DVD-Video from Hard Disk or File. - Click the Import DVD Folder button.
- Select your folder from the list and hit OK.
- In the next dialogue, Under disk label .. TICK Title 0 (Chapter 0 gets auto selected) and hit IMPORT.
- After the import process .. it adds the file to the timeline. Do the same with the rest 2 folders you made from STEP 1 and STEP 2.
- Let the Create Menu option remain TICKED this time.
- Create the Menu as you want it to be shown on your DVD player.
- And this time INSERT a blank DVD and select the dvd writer from the list
- And BURN baby BURN !
You will now have a 3 in 1 DVD, fully playable in your DVD standalone player. Oh and just incase your DVD dosent fit into the DVD in step 3 ? I would suggest you lower the Video Bitrate to say 5200 and Re-Encode .. crazy i know .. but this seems to be the BEST way to preserve quality and stuff in 3 movies lol.
Hope this helps some of you, If you have any questions or suggestions, i'd be glad to hear them 
Regards
Dhanesh.
Reply
MediYama
Jun 17 2007, 05:23 PM
Darn that takes a whole lot of space on your disk.. My disk only has about 10 gig left available, heh. However it looks like a very useful tutorial .
Reply
.:Brian:.
Jun 17 2007, 07:42 PM
Wow, this is a very nice tutorial that you have written, thanks for doing so. I do have one very important question though....what does this do to the quality of the movies that you have? It seems to me that shrinking them/compressing them or whatever would make it so that the quality is reduced. Just wondering if it is something that happens, or that you have noticed or whatever.
Reply
Similar Topics
Keywords : 3, 1, dvd, tutorial
- Moving To Fedora 9
Tutorial on how a newbie can move to using this fantastic OS Fedora 9, (1)
Bulletproof Ftp Server Tutorial
BulletProof FTP Server Tutorial (0) thanks to someone for this tut. Configuring your Bulletproof FTP Server Tutorial I am not sure
where I found this tutorial, It’s been a while…It might even have been here... ..So if it is one of
yours, my hat goes off to you once again.... After reading the excellent tutorial on "Creating an
FTP" that Norway posted… (I would suggest reading and following his tutorial first, then following
up with this one) I thought that perhaps this tutorial might be pretty helpful for those interested
in knowing how to configure their Bulletproof FTP Server that don't already ....
Gimp Userbar Tutorial
Very Easy... (3) Hello, I will tell you how to create a nice userbar in the open-source software called GIMP. You
should GIMP 2.4.6 installed on computer, and if you don't, go to The GIMP Website. Make sure
to view a few beginner tutorials to have a basic understanding of GIMP. This is what the finished
userbar will look like: It is very simple, and I learned it easy. I will guide you through all
the steps of making a userbar. ~ Now we will go through all the steps. 1. Open GIMP and click
New(Ctrl + N) and make the size for your new image 350 by 19. Your screen should look....
Conditional Statements Of Javascript
Tutorial for beginers (1) In this tutorial we will discuss about conditional statements of JavaScript. JavaScript has 4 types
of conditional statements such as if statement, if...else statement, if...else if....else statement
and switch statement. All this statements are used in different condition. Now we will try to
discuss this 4 types of statements with some examples. When we need to execute some code only in a
specified condition, then we will use if statement. The syntax of if statement is if (condition) {
code to be executed if condition is true } One important thing is that this if will....
C/c++ -gdb Linux Debug Tool
Simple Gdb tutorial (0) To run the C/C++ file use $ gcc –g –o test sample.cpp To debug the code use following
command $ gdb test --- you will get following messages GNU gdb Red Hat
Linux (6.3.0.0-1.122rh) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered
by the GNU General Public License, and you are welcome to change it and/or distribute copies of it
under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty
for GDB. Type "show warranty" for details. This GDB was configured as "i386-redh....
Linux Beginners - Tutorial On Editors In Linux.
(1) This is a simple tutorial on the editors in Linux. I use these 3 editors for programming on linux:
1. vi -- available in all Linux and unix box, used to edit 2. vim -- not in all Linux flavors
and it has got default coloring of key words feature, used to edit 3. view --Its used only to
view, recommended to use for viewing of system config files, as it should not get edited without
your notice. Following are the basic commands comes handy with these editors #Open a file for
edit $ vi test -- creates a file if file is not exist in the current director....
Photographing Fireworks
Tutorial for shooting fireworks (7) Photographing fireworks presents some technical challenges, it needs quite a different approach to
most other subjects but follow these few steps carefully and you will be successful. What are we
photographing? Basically we are photographing streaks of light that develop over a period of time
against a black background. The great thing about a black background is that it makes no impression
on the film, or sensor in the case of a digital camera. So we can leave the shutter open as long as
we like, the black will still be black. So, in short, the way to photography firew....
Safety
Anyone who knows a tutorial (9) Hey! Anyone who know a tutorial where they teach you how to protect your scripts from danger
(hacks and stuff)? I think I need to start to think about theese stuff now.....
How To Make An Test-based Rpg Game!
This is a step by step tutorial of how to make a RPG test-based game (4) Welcome Hello this is Convictlife and i have made an RPG game and for you noobs out
there i will be explaining Here is a breif structure of this post: 1. Getting your codes. 2.
Getting your host. 3. Uploading your codes. 4. Configuring your codes. 5. MySQL 6. phpMyAdmin 7.
CronJobs 8. Editing 9. Finalizing Getting Your Codes! First of all you need codes that
will power your website. If you are a master coder (like Dabomstew) then you can code these codes
yourself, but if you are "so-so" then you will need to get codes from somewhere. I got....
Gimp: Working With Text
Simple GIMP tutorial for beginners (5) GIMP Working with Text 1) Start a new image with dimensions that hold your text. Plan for extra
room. 2) Text Tool: Create a Text. Type in a name or something. Pick a font and Size of 50 pixels.
3) Adding a Shadow: There are different ways add a shadow. There are many ways to add a
basic shadow but some will result in your shadow being clipped on the edges. So I'll show you a
work around. This would also Apply when part of your blur - or other filter - gets knocked off the
text selection you apply it on. I've found out you can do two things. 3.A) I....
C# Tutorial : Lesson 3 - Programming Constructs
(1) Conditional Branching By branching we imply, having different paths for execution.
Conditions are used to determine which statements need to be executed. Suppose, you have a program
to store the details of employees. Depending upon the post of the employee, there would be various
fields associated with it. A department head, for example, would have a property denoting the
department he heads, etc. We use conditional branching in such a scenario. C# provides the
following conditional constructs:- if .. else Syntax:- if ( ) { statements } else { statement....
Tutorial: Dreamweaver, 3ds Max, Flash, Html, Css
Dreamweaver, 3DS MaX, Flash, HTML, CSS (8) Hi all, This is a continuation thread from my previous topic: Photoshop Tutorials, A large list of
tutorials links! here: www.astahost.com/photoshop-tutorials-t14351.html I'm posting some
Dreamweaver, 3DS MaX, Flash, HTML, CSS Tutorial links here! I got these links from various
places! Please reply to this, If you find them as an useful one! CSS Tutorials
http://www.westciv.com/style_master/academy/css_tutorial/ http://maxdesign.com.au/
http://www.htmlgoodies.com/beyond/css/index.php http://www.echoecho.com/css.htm
http://www.htmldog....
Wireless: Bypassing Mac Filtering
Tutorial (10) Sometimes you scan the neighborhood for the wireless connections, you see open connections but can
not connect to them. Well this is possible because they use MAC filtering to secure up their
network. I will try to explain how to bypass this protection NOTE: This is for EDUCATION purpose
only to show you it is possible to bypass this security. I am not responsible for unauthorized use
of these information. Requirements : 1- You need some tool for sniffing the traffic. I suggest
using Aircrack-ng (http://www.aircrack-ng.org/) 2- You need some tool to change your MAC ad....
Installing Glut To Dev C++
A tutorial to install GLUT on Dev C++ (3) This is a tutorial that someone submitted to my programming site when it was up because I didn't
know how to install glut on any other compiler than my own. I though it would be helpful to post
this up for everyone here so they can use GLUT as well without having to google for hours. I'm
not sure if I'm allowed, but I have quoted it and have given credit where credit is due, so if
this post is allowed I hope this helps those people who couldn't program in GLUT yet. QUOTE
Installing G.L.U.T. to Dev C++ By James Duran (email: vrok137@yahoo.com) ....
[tutorial] Pc-pc Home Networking.
How to connect 2 computers at home via a LAN wire. (9) Hello Folks, Its been long since i've posted so thought i'd keep myself alive by posting
up a useful tutorial. I know how hard it can be to not know about something, and ask around with no
clue of whats goin on. So i've made sure that every word in this tutorial is understandable by
any new user with the least knowledge of a PC and Networking.
PC-PC Home Networking Tutorial First and foremost make sure
you have the right cable. A Right cable would be a Cross-Over LAN wire (PC-PC). ....
[tutorial] Basics Of C Programming - Part 1
(11) Well, I was going through a few posts on C / C++ on asta .. and found a very less C related
subjects. I went through the entire tutorial of mastercomputers >>HERE .. It was a nice
tutorial for guys who have a little knowledge of programming basics and want to go into hardcore
programming. Since there was no Basic overview of what C was, i thought of writing one /smile.gif"
style="vertical-align:middle" emoid=":)" border="0" alt="smile.gif" />. I wil make shure that what i
write will be 100% accurate, but its human to error so please correct me if i am wrong. Let....
Pre Loader Tutorial For Flash
Made by: Jordain (6) Simple pre loader tutorial with play button by: Jordain Joyce First of all open up flash then
Create 4 Layers and in order name them: Actions
Loader outline
Loader Bar Content Then create 3
frames for each layer. Lets start in the actions layer, for the first frame make it blank and the
second frame make it blank also. Press F9 to open the actions panel (make sure you ....
Using The Php Mail() Function For Images Or Attachments
Can't find a decent tutorial! (3) I read the one mail() tutorial that was posted in the tutorial section and to my horror found that
he had quoted almost verbatim from the PHP Manual off php.net, and made a comment about it, and also
found that if you were new to PHP or the Manual that it was informative but not indepth enough for
my tastes. This is not a tutorial although with the code that will be posted it might look like
one, that is not its intent or purpose. I have searched and found many so called tutorials about
MIME mail and boundries and all that but basically it either told me to use PHPMai....
VB.NET: MS-Access Interaction Tutorial (Part I)
(18) VB.NET - MS-Access Interaction Tutorial I got down to writing this tutorial because of
this certain question that Dhanesh posted on our forums here . This tutorial will attempt to
show you how to: Create a MS-Access Database Create/Edit/Delete Tables in it Access it and
Add/Edit/Update data in those tables all with VB.NET . Note: This is not a beginner's
tutorial and I'll assume you know all the basics of creating WinForm based applications using
VS.NET . The screen-shots provided are from VS.NET 2005 - but you shouldn't f....
Photoshop Tutorial: Carbon Fiber Pattern
A very popular pattern (6) This tutorial will teach you how to make the ever popular Carbon Fiber pattern. I use it frequently,
since it can create many different looks when it's applied in different scales. Anywhos,
let's get started! 1. Create a new image, 4px by 4px, with a transparent background 2.
Zoom in 800% 3. Using your 1px Pencil tool ( ) and the color #595959, create a 2px wide by 1px
high rectangle in the top left corner of the square 4. Now switch your color to #474647 and make
another 2x1 pixel rectangle below the one you just made 5. Repeat Step 4 with the c....
Yahoo! Messenger Protocol Tutorial - Part 2
(2) Part 2 - History The need for humans to communicate faster and more efficiently has been one of the
driving forces behind the Internet. Not since the invention of the telephone has communications
between humans been more readily available. The communication power of the Internet began to take
shape in its infancy with one of the first Internet applications, email. While the Internet was
still ARPANET and with only four links, the first email message was sent by Ray Tomlinson in 1971.
The first message consisted of the text “Testing 1-2-3” and did not contain any of th....
Change Fonts On A S60 Phone [tutorial]
(13) I didnt find a suitable catagory for this tutorial so posting it out here, Mods please find a
suitable place for this if i am wrong. Allright, lets get started. Almost everyone now owns a
Nokia, and out of that almost 70% use SymbianOS phones (S60). You can change the themes the
wallpapers etc on your phone, but i assume that a few of you would like to change only the Font.
Nokia uses its default font called the NokiaSans . This is hard coded and set in the ROM of your
phone, so that whenever we format the phone, the same font is taken and used. Many of you might hav....
A Complete Java Tutorial
(4) The Java Programming Manual Chapter 0: Introduction. What Java is and what it is not Java is
an object oriented programming language that has evolved from and to substitute the C and C++
programming languages. But why? The main reason for Java to have evolved is "platform
independence" we shall come to this part later. When a programming language is designed, certain
trade offs have to be made. 1) Ease of use versus Power 2) Efficiency versus Safety 3) Rigidity
versus Extensibility This also gives a more or less accurate comparison of C++ versus Java Java ha....
Excelent Classical Animation Tutorial
Excelent classical animation tutorial (5) Hello all, i have found a great tutorial of classical animation by Doug Compton, a cartoonist and
animator from karmatoons, he had worked in projects like "Bugs Bunny's 50th Birthday Special"
and many other. Check the tutorial here: DRAWING FOR CLASSICAL ANIMATION ....
Photoshop Tutorial: Full Grunge Signature
Using Photoshop 8.0 CS (16) Side Notes: I hope you enjoy it. I made this awhile ago, but didn't posted it before. I
though it was time to be shared, so here it is. ....
Short "slicing" Tutorial
if you have photoshop... (12) Ok if you have Photoshop and Dreamweaver and you have no idea how to slice images in photoshop and
how to export it to dreamweaver here is a short picture-guided tutorial... NOTICE: This tutorial
will show you only how to slice FLATERNED photoshop image and export it to html and open in
Dreamweaver... Ok here we go... I hope this was understandable... /rolleyes.gif' border='0'
style='vertical-align:middle' alt='rolleyes.gif' /> /cool.gif' border='0'
style='vertical-align:middle' alt='cool.gif' /> ....
Photoshop Tutorial: Forum Signatures
(12) .:OBJECTIVE:. To create an easy and attractive forum signature without excessive know how of the
Photoshop program. .:DIFFICULTY:. Medium, must have some rudimentary Photoshop skills and the
ability to follow instructions. .:TOOLS:. Photoshop 7.0 or above. .:TUTORIAL:. 1. First of all get
this image (image made by me with brushes by silverninja from deviantART). Copy and paste this
onto a new sheet in Photoshop. 2. Create a new page (ctrl + N) with a size you feel is appropriate
for your creation, I myself prefer 400px by 100px. Now paste (ctrl + V) the image as a b....
3ds Max Tutorial #2-creating Reflective Materials
(1) The next tutorial is based on creation of a reflective material in 3ds max. this tutorial will help
u create a surface that reflects everything in sight. 1. Fire up 3dsmax. 2. Press 'm' 3.
Change the box where u see 'Normal' i.e. material type. Change it to raytrace. 4. Change the
colours to the colours you want. 5. In the maps section click the box next to reflection. 6. Select
raytrace from the list. 7. Apply the material to any object. 8. Render the scene
Voila!!! you have created a reflective material. You can also try.. 1. Using the ....
Cron Jobs Tutorial
So you wanna learn Cron jobs huh ? (3) How to setup Basic Cron Jobs. Ok. Many people are yelling that they cannot configure the
crons properly. Here is a short tutorial which will help you set them. I have tried my best to
explain the concept but there can be more advanced configurations. Basically you will want to run a
PHP script file in specific intervals. Suppose you want to execute a php file called maintanence.php
every one hour. This is what you do :- The CRON Command is in the Following Format CODE
[ Minute - Hour - Day - Month - Weekday ] - Command The COMMAND, can be bro....
How To Remove Bad Sectors Or Bad Clusters From HDD
a tutorial for you all (16) hi friends, there is small tutorial to remove Bad Sectors from hdd to remove bad sectors you need a
program named SeaMap now we start Start the SeaMap.exe software Set the option by typing SD and
then press enter Press 1 then 0 or 1 to select drive Then press 2 and there will be a option (Y/N)
press n for No Press Esc button one to go back to command line Type FD Type y for yes the Hdd will
format the whole disk and removes bad sectors and partitions Now the computer has to be restarted,
Restart your computer Partition your Hdd using fdisk and then format all partitio....
Looking for 3, 1, dvd, tutorial
|
|
Searching Video's for 3, 1, dvd, tutorial
|
advertisement
|
|
