Hi all,
My hard disk was having some problems! If I open photoshop like large memory eating applications, after some times my system will automatically reboots! Thats why I had decided to format the hard disk and check the hard disk for errors! I was fixing the bad sectors using Hiren's boot CD ( www.hiren.info/pages.php/bootcd ) 's Partition Commander option! Its worked fine for about half an hour! and fixed some bad sectors in my hard disk. But unfortunately in the middle, I lost my power supply! and the system was not having any UPS! After that, when I restart my system, its always displaying as:
"CMOS checksum error
Time and Date will be reseted"

and each time time and date will be reseted to 01/01/2002. I had changed the CMOS battery! But thats not helped me! If anybody knows, how to fix the problem, please do reply here!

Thanks!

It is possible for the CMOS chip to become corrupted, which could cause a CMOS checksum error. If this is the case, you will need to replace the CMOS chip itself. I wouldn't recommend this as a first resort. See if you can find firmware or new flash for your BIOS or CMOS and try installing that first.

~Viz

Niran, what type of computer do you have? Does the BIOS keep some sort of event log? I see these on the Dells and didn't know about this myself, but you MUST clear the Event Log if the new battery still won't work. It's definitely worth a shot if you have this option.

For some reason the log seems to be like some kind of 'restore point' for the BIOS. Had a battery issue on a Dell machine last week that got me pulling my hair out.

Thanks to WeaponX and vizskywalker...

I am having one assembled PC! and having old Intel motherboard D 845 GLAD which is an outdated one! There is no more support for the motherboard from Intel , as they are clearly mentioned in the site:

http://www.intel.com/support/motherboards/desktop/d845glad/



The last BIOS update was published on 10/8/2003 Even though, I had downloaded that flash update and tried that one! But thats not working fine for me! The interesting thing is that, I can shutdown the system and and restart the system without any problem! But if I remove the power supply from the UPS, then only its showing the error message like that! that means, removing main supply only creates the problem! I had tried replacing the CMOS battery! But its not working fine for me!



How can I know, whether its the problem with CMOS chip or not! and I'm not aware of much hardware stuffs! So, can you explain me, how can I change the CMOS chip? or do I need to get one new Motherboard

Thanks..

There are a lot of things that could cause such failures. The battery doesn't seem to be the problem, since you've alreay replaced that one.
Maybe there's something wrong with your PSU. Do you know what caused the power failure ? That might have caused some damage to your PSU or CMOS.

Ow, btw. Check the 'Clear_CMOS' jumper, make sure it's not set to clear the CMOS

Try to reset the CMOS, it's usualy done by pluging the clear_cmos or reset_cmos jumper on the motherboard and turning on your computer for some seconds, after that the CMOS content will be replaced with the original one.

Read your motherboard's user manual for more info, each one is different...


This post has been edited by borlafu: Dec 3 2006, 11:14 PM

Try the suggestions mentioned earlier to try resetting the CMOS using the jumpers/pins on the motherboard. The chip should be working if you can get in. Might just need a good reset.

You can't replace the CMOS chip unless you know how to solder. It's built into the motherboard.

After considering CMOS clear, you should also consider replacing the motherboard.

Sounds like you changed the PSU and CMOS battery. But if the problem still persists I would think to replace your motherboard. There is a possibility that when the first PSU was going bad it might have damaged the motherboard.

The CMOS can be replaced, it sits in a socket, you'll only need a tool to get it out (don't try it with a screw driver, I've tested it on several (dead) hardware and you'll end op with a broken socket )